Filter
Top Products
Troubleshooting Tools 133
INSERT BOOTABLE MEDIA — Insert a bootable floppy disk, CD, or other bootable
media.
INVALID CONFIGURATION INFORMATION - PLEASE RUN SETUP PROGRAM — Enter the system
setup program (see "System Setup" on page 89) and correct the computer
configuration information.
KEYBOARD FAILURE —See "Keyboard Problems" on page 112.
MEMORY ADDRESS LINE FAILURE AT
address
, READ
value
EXPECTING
value
— See
"Memory
Problems
" on page 114.
MEMORY ALLOCATION ERROR —
1
Turn off the computer, wait 30 seconds, and then restart the computer.
2
Try to run the program again.
3
If the error message appears again, see the software documentation for additional
troubleshooting suggestions.
MEMORY DATA LINE FAILURE AT
address
, READ
value
EXPECTING
value
—
M
EMORY DOUBLE WORD LOGIC FAILURE AT
address
, READ
value
EXPECTING
value
—
M
EMORY ODD/EVEN LOGIC FAILURE AT
address
, READ
value
EXPECTING
value
—
M
EMORY WRITE/READ FAILURE AT
address
, READ
value
EXPECTING
value
—
M
EMORY SIZE IN CMOS INVALID —
See "Memory Problems" on page 114.
NO BOOT DEVICE AVAILABLE —
• If the floppy drive is your boot device, ensure that a bootable floppy disk is in the
drive.
• If the hard drive is your boot device, ensure that the cables are connected and that
the drive is installed properly and partitioned as a boot device.
• Enter system setup and ensure that the boot sequence information is correct (see
"System Setup" on page 89).