Filter
Top Products
214 Adding and Replacing Parts
If you are going to install a replacement drive, see "Installing a Hard Drive
into the Rotatable Carrier (Tower or Desktop Computer)" on page 215.
8
Ensure that all connectors are properly cabled and firmly seated.
9
Rotate the hard-drive carrier back into place (see "Rotating the Hard-Drive
Carrier Back into the Computer" on page 159).
10
Replace the computer cover (see "Replacing the Computer Cover" on
page 161).
NOTICE: To connect a network cable, first plug the cable into the network port or
device and then plug it into the computer.
11
Connect the computer and devices to electrical outlets, and turn them on.
1 blue tabs (2) 2 hard drive in primary hard-drive bay
3 secondary hard drive bay
1
2
3