Filter
Top Products
12 | Removing the Power-Light Board
Removing the Power-Light Board
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
"Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
Remove the base cover. See "Removing the Base Cover" on page 10.
Procedure
1 Lift the connector latch and, using the pull-tab, disconnect the power-light board
cable from the system
board.
2 Remove the screw that secures the power-light board to the palm-rest assembly.
3 Lift the power-light board off the palm-rest assembly.
1 screw 2 power-light board
3 power-light board cable
1
2
3