Filter
Top Products
1
http://www.delta.com.tw/industrialautomation/
5011640301-8SE1
2006-11-23
Switch-Type Digital Extension Module
Instruction Sheet
Warning
9 Please read this instruction carefully before use.
9 DVP08ST11N is an OPEN-TYPE device and therefore should be installed in an enclosure free of airborne dust, humidity,
electric shock and vibration. The enclosure should prevent non-maintenance staff from operating the device (e.g. key or specific
tools are required to open the enclosure) in case danger and damage on the device may occur.
9 DO NOT tough any terminal when the power is switched on.
Introduction
1. Thank you for choosing Delta DVP series programmable logic controller. DVP08ST11N shall be used together with
PLC SLIM TYPE PLC occupying 8 input points. Including MPU, the digital I/O can be extended to maximum 256
points. Besides, maximum 8 special extension modules (AD/DA/XA/PT/TC) are extendable from MPU.
2. No external power supply and signals are required, DVP08ST11N allows you to directly control its input points by its
switches.
3. As digital switches, DVP08ST11N is able to input instructions without required external wiring for receiving signals.
Besides, DVP08ST is handy and safe for using in teachings.
Nameplate
24Vdc 0.5W
MADE IN XXXXXX
Delta PLC model name
Input power spec.
Barcode, Series No.
Model Name and Series No.
DVP series
Number of points
Switch-type digital extension module
DC power input
No output module
Production No.
Production week
Production year (2005)
Production plant (Taoyuan)
Version No.
Model name
Product Profile & Outline
60
DVP-08ST
90
903
25.2
7
6
5
5.5
3
1
X2
4
3
2
X7
X6
X5
X4
X3
0
ON
X0
X1
3.4
1
2
10
7
4
8
3
6
9
5
Unit: mm
1 DIN rail (35mm)
2 Extension unit/module connection port
3 Model name
4 Input indicator
5 DIN rail clip
6 Input switch
7 Fixing clip for extension unit
8 Nameplate
9 Extension unit/module connection port
Aiming pinhole for connection to MPU