Filter
Top Products
SMT Power Inductor
SISH85 Type
25 : 100KHz, 0.1V
o
C
Features
RoHS compliant.
Low profile (5.2mm max. height) SMD type.
Unshielded.
Self-leads, suitable for high density mounting.
High energy storage and low DCR.
Provided with embossed carrier tape packing.
Idel for power source circuits, DC-DC converter, DC-AC inverters
inductor applications.
In addition to the standard versions shown here, customized inductors
are available to meet your exact requirements.
Electrical Characteristics:
76
0.10 1. 00 10.00 100.00
CURRENT (A)
0.10
1.00
10.00
100.00
1000.00
INDUCTANCE(uH)
102
681
471
331
221
151
101
680
470
330
220
150
100
6R8
4R7
3R3
2R2
1R5
1R0
2R7
R68
R33
SISH85 - R33 0.33 2.0 20.0 16.0
SISH85 - R68 0.68 5.0 13.0 12.0
SISH85 - 1R0 1.00 6.0 11.0 10.0
SISH85 - 1R5 1.50 8.0 9.0 9.0
SISH85 - 2R2 2.20 11.0 7.8 7.4
SISH85 - 2R7 2.70 12.0 7.0 6.6
SISH85 - 3R3 3.30 14.0 6.4 5.9
SISH85 - 4R7 4.70 18.0 5.4 4.8
SISH85 - 6R8 6.80 27.0 4.6 4.4
SISH85 - 100 10.00 38.0 3.8 3.9
SISH85 - 150 15.00 46.0 3.0 3.1
SISH85 - 220 22.00 85.0 2.6 2.7
SISH85 - 330 33.00 100.0 2.0 2.1
SISH85 - 470 47.00 140.0 1.6 1.8
SISH85 - 680 68.00 200.0 1.4 1.5
SISH85 - 101 100.00 280.0 1.2 1.3
SISH85 - 151 150.00 400.0 1.0 1.0
SISH85 - 221 220.00 610.0 0.8 0.8
SISH85 - 331 330.00 1020.0 0.6 0.6
SISH85 - 471 470.00 1270.0 0.5 0.5
SISH85 - 681 680.00 2020.0 0.4 0.4
SISH85 - 102 1000.00 3000.0 0.3 0.3
PART NO.
1
L
(uH)
DCR
(m )MAX
Isat
(Adc)
2
3
Ir
(Adc)
1. Tolerance of inductance: 20%.
2. Isat is the DC current which cause the inductance drop less than 10% of its nominal inductance without current.
3. Ir is the DC current which cause the surface temperature of the part increase less than 45
4. Operating temperature : -20 to 105 (including self-temperature rise)
o
C.
oo
C C
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG)
252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: 886-3-3591968; FAX: 886-3-3591991
http://www.deltaww.com
Mechanical Dimension:
A
B
F
E
D
C
UNIT:mm/inch
A = 12.94 / 00.510 Max.
B = 9.4 / 0.370 Max.
C = 5.2 / 0.205 Max.
D = 7.9 0.2 / 0.303 0.008
E = 2.5 0.2 / 0.098 0.008
F = 2.5 0.2 / 0.098 0.008
RECOMMENDED PAD PATTERNS
3.5
3.5
7.0
14.0