Delta Electronics SSW 230 V - 6kVA Switch User Manual


 
SSW 230V-6kVA
SSW 230 V – 20 kVA
Description:
The static switch product line is a micro-controller driven
state-of-the-art switch between the AC mains and the
inverter to provide uninterruptible AC power. After an
extremely quick detection of a mains fault, the static
switch transfers the load almost without cut off to the
redundant AC line. A communication and synchronization
bus is responsible for the system performance and the
Delta inverters are synchronized to the public AC mains.
Modular UPS configurations in ON LINE or OFF LINE
mode can be realized in combination with Delta inverters
and DC power systems with battery backup.
Features
Two static switch models 6 kVA and 20 kVA
230 Vrms / 50 Hz single phase
ON LINE or OFF LINE mode selection
High performance AC line quality monitoring
Quick detection of AC faults
Configurable switching criteria
Load transfer of up to 6 kVA or 20 kVA
Synchronization of the Delta inverter group
Convection cooled
Compact and light
Power connectors on the rear
Specification
General
Product name SSW 230 V – 6 kVA
SSW 230 V – 20 kVA
Safety EN 60 950, class I
EMI, radiated compliant with EN 55 022, class B
EN 300 386-2
Cooling Convection cooled
Public AC Input
Voltage range 184 ... 276 V
rms
Frequency range 45 - 55 Hz
EMI, conducted compliant with EN 55022, class B
Inverter AC Input
Voltage range 230 V
rms
± 1%
Frequency 50 Hz
EMI, conducted compliant with EN 55022, class B
AC Output
Voltage, nominal 230 V
rms
Frequency, nominal 50 Hz
Maximum power 6 kVA / 20 kVA
cos
φ
, range 0 .. 1 ind. and cap.
EMI, conducted compliant with EN 55022, class B
Mechanics
6kVA ; 20kVA
Width, overall 2.8” / 70 mm ; 5.3” / 135 mm
Depth, overall 13.8” / 350 mm ; 13.8” / 350 mm
Height, overall 12.2” / 311 mm
;
12.2” / 7U / 311 mm
Weight 7.7 lb / 3.5 kg
;
18.0 lb / 8.6 kg
Switching Criteria
According to ETS 300 132-1
Static rms deviation ± 10 %
Dynamic rms deviation ± 15 % for max. 500 ms
Static freq. deviation ± 2Hz
Dynamic freq. deviation ± 2Hz for 5 s maximum
Environment
Operating temperature 0 ... + 50 °C
Relative humidity 95 % max, non condensing
The Static Switch Product Line