Filter
Top Products
Through Hole Power Inductors
THMR1395 Type
Mechanical Dimension:
High current ( lsat up to 66A ) though hole type.
Magnetically shielded, suitable for hight density mounting.
High energy storage and low DCR.
Ideal for power source circuits, DC-DC converter,
DC-AC inverters inductor application.
In addition to the standard versions shown here,
customized inductors are available to meet your exact requirements.
Features
Electrical Characteristics:
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG)
At 25 : 100KHz, 1.0V
o
C
252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: 886-3-3591968; FAX: 886-3-3591991
http://www.deltaww.com
153
UNIT : mm/inch
A = 12.50 / 0.492 Max.
B = 14.50 / 0.571 Max.
C = 3.20 0.5 / 0.126 0.020
D = 9.50 / 0.374
E = 1.30 0.1/0.051 0.004
B
A
7.5/0.295
9.0/0.354
1.6/0.063
D C
E
1.Tolerance of inductance : 0.28~1.20uH 15%
2.Isat is the DC current which cause the inductance drop less than 20% of its nominal inductance without current
o
3.Irms is the DC current which cause the surface temperature of the part increase less than 45 C
oo
4.Operating temperature: -40 C to 125 C ( including self-temperature rise )
1
3
2
PART NO. L DCR Isat Irms
(uH) (m ) 8% (Adc) (Adc)
THMR1395-R28 0.28 0.47 66 47
TH -R35 0.35 0.47 58 47
TH -R45 0.45 0.96 47 35
TH -0R6 0.60 0.96 40 35
TH -0R8 0.80 1.25 37 30
TH -1R2 1.20 1.55 30 27
MR1395
MR1395
MR1395
MR1395
MR1395
RECOMMENDED PAD PATTERNS