Filter
Top Products
Installation and Setup
12
Unpacking - IMG 1010
Topic Location: IMG 1010-Installation and Setup Guide > IMG 1010-Hardware
Installation
Retain all shipping materials in case you need to either relocate or re-ship the unit in
the future. Use the packing materials to return the unit to the supplier; otherwise
you may be charged for any damage that may occur during shipment.
Procedure
The IMG 1010 and supplied items are shipped in a single container. Carefully unpack
as described below.
1. Open the container and remove the packing list.
2. Remove the protective cover and remove the IMG 1010 from the container.
3. Carefully remove the static protective bag.
4. Carefully inspect the IMG 1010. Should any discrepancies exist, contact your
supplier representative immediately.
Supplied items
Review the packing list to ensure that the following items have been sent. Should
any discrepancies exist, contact your supplier representative immediately.
AC Power Chassis
AC power cord (AC option)
Software CD ROMs
DC Power Chassis (IMG 1010 Only)
DC power module plugs (2) (DC option)
DC grounding lug (factory-installed on back of unit) (DC option)
Software CD ROMs
Next Task
Rack Mounting the IMG or
Surface Mounting the IMG