Filter
Top Products
Installation and Setup
14
19" Rack Mounting
Procedure:
1. Remove the brackets from the front mount position.
2. Position the mounting brackets to the desired position.
3. Align the holes on the mounting bracket ears to the mounting holes on the rack.
4. Secure with screws.
Required Tools and Hardware
The following customer-supplied tools and hardware are needed to mount the unit.
Phillips head screwdriver
Rack mounting hardware
NOTE: At the rear of the unit on each side, a mounting hole
with a captive nut is available for attaching additional
mounting ears for extra support. Contact your Sales
Representative to order additional brackets. Use 6/32 screws
for this application.
23" Rack Mounting
A bracket for a 23" rack can be ordered for use in Enterprise racking. The
bracket has front and rear mounting options for added stability. See Below