Filter
Top Products
Installation and Setup
16
Surface Mounting - IMG 1010
Topic Location: IMG 1010-Installation and Setup Guide > IMG 1010-Hardware
Installation
Mounting Guidelines
When mounting the chassis, follow these guidelines:
Do not obstruct air flow to the front or the side vent holes towards the rear of
the unit.
Allow sufficient room, approximately 76 cm (2.5 ft.), to access the tray.
Procedure
1. If desired, mount the self-adhesive feet to the bottom of the unit to protect the
surface finish.
2. Set the unit on a clean, secure, and level surface.
Next Task
Connecting AC Power or
Connecting DC Power