Installation and Setup
18
AC Power Module
The AC power docking station provides an AC input power module with an integrated
fuse, power switch, and standard three position female AC input connector. This
connector allows the docking station to interface with all variations of AC outlets by
simply using a standard power cable with a compatible outlet plug. The figure below
shows the AC Power Module.
Other Considerations
Uninterruptible Power Supply Option
If your site has frequent power interruptions, consider using an Uninterruptible
Power Supply (UPS) for your IMG 1010. You can avoid downtime by running your
system that receives its AC power from batteries during a power failure.
Surge Protection
It is advisable to install a surge protector between your call processing system and
the power outlet. If a high voltage surge occurs on the power line, this device can
protect your system by sending the overload to ground.