Filter
Top Products
IMG 1010 - Hardware Installation
27
Redundant Data - IMG 1010
Topic Location: IMG 1010-Installation and Setup Guide > IMG 1010-Hardware
Installation
The following illustration shows the cabling for redundant data.
DATA PORT REDUNDANCY
1. The DATA0 and DATA1 ports are used for communication between the IMG
1010 and the IP network.
Ethernet Ports DATA0 and DATA1 are used for RTP streams.
Ethernet Porta DATA0 and DATA1 can also be used for SIP or H323
signaling.
VOIP Module 0 and Module 1 send RTP to and from the ethernet DATA
Ports within the IMG 1010
An IP address shared by DATA0 and DATA1 for redundancy is
configured in Clientview.