Filter
Top Products
Installation and Setup
64
4. To start VNC server, enter the following command below. If this is the first time
you are starting VNC you will be asked for a password. Enter excelsw for
password. Below is the command to start VNC server
$ vncserver :1
5. To verify the server is running enter one of the following commands below.
$ /sbin/service vncserver status
or
$ ps -ef|grep vnc
6. Once VNC server is started you can log into VNC server through a VNC viewer.
Follow steps below to load the VNC viewer on a PC running Windows
®
-based
Operating system.
Loading/Running VNC on PC running Windows® Operating
System
The VNC Client is installed on a separate PC. Below is how to install on a PC running
Windows
®
operating system
1. Download a copy of the VNC client viewer to your PC from the site:
http://www.realvnc.com/download.html
2. Run VNC Viewer by double clicking on the VNC icon.
3. In the window that appears, enter the IP Address of GCEMS server followed by
:1
4. Select OK and if the VNC Viewer connects then a password will be prompted.
Enter the password excelsw.
5. At this point the VNC Viewer will connect to the server and a view of the GCEMS
desktop will appear. You can now work in the Linux Environment as an excelsw
user