Filter
Top Products
Chapter 4: Web Configuration
105
Wireless
This page allows you to configure the router as an Access Point. You may setup the
settings for security, access control, and repeater features for this device.
Basic
To set the basic configuration for the wireless features, please open Basic page
from the Wireless menu.
Enable Wireless Network:
Click this check box to enable the
wireless network function.
Hide Wireless Network:
Check this box to hide the SSID of this
AP (access point). Then other people
in the network cannot find the SSID of
this device.
Wireless Network Name (SSID):
The system will detect the SSID of
your router and displayed in this field
for your reference.
The SSID is the identification characters of
a router. The default words will be shown
on this page. If you do not check “Hidden
SSID” item, the router will periodically
broadcasts its SSID to allow the wireless
clients within the range to recognize its
presence. This can create a security hole
since any wireless clients which got the
broadcast might associate to your system.
Please note that if you want to
communicate, all wireless clients should
use the same SSID with the router or
access point.
Channel:
The frequency in which the radio links
are about to be established. Select
one channel that you want from the
drop down list.
As an administrator of network, one
must search which channels are
available and then assign one
available channel as the
communication channel. All the other
clients that match the SSID and pass
security authentication can access this
device and will use the same channel
that you set here.
Transmission Mode:
It decides the mode of data
transmission. Choose the one that you
want to use from the drop-down menu.
There are 802.11b only, 802.11g only
and Mixed Mode provided here.