Dynalink RTA1030W Network Router User Manual


 
Chapter 4: Web Configuration
67
Chapter 4: Web Configuration
Some users might want to set specific configuration for the router such
as firewall, data transmission rate…, and so on. This chapter will
provide you advanced information of the web pages for the router for
your reference.
Using Web-Based Manager
After properly configuring you host PC, please proceed as follows:
1. Start your web browser and type
192.168.1.1, the private IP address of the
ADSL Router, in the URL field.
2. After connecting to the device, you will be
prompted to enter username and
password. By default, both the username
and the password are admin. An example
under Windows XP is shown as the left
figure.
If you login successfully, the main page will
appear. From now on, the ADSL Router
acts as a web server sending HTML
pages/forms on your request. You can fill
in these pages/forms and apply them to
the ADSL Router.