Eaton Electrical 9125 Power Supply User Manual


 
Read Me First
Powerware 9125 700–2000 VA UPS
Internal Battery Connection Instructions
Use the following procedure to ensure proper battery
operation before installing the UPS:
Verify that the UPS is off and unplugged.
Remove the UPS front panel.
Connect the internal battery connector.
Reinstall the UPS front panel.
Refer to the Powerware 9125 UPS (700–2000 VA) User’s
Guide for UPS installation instructions.
If the UPS requires any type of transportation in the future,
disconnect the UPS internal battery connector using the
above steps in reverse order. If you need additional
assistance, refer to the user’s guide for contact
information.
1
2
3
4
5