Filter
Top Products
5 Management Software Guide
21
Byte Count Button
You can set the unit of the RX and TC counter to Byte count.
Packet Count Button
You can set the unit of the RX and TC counter to Packet count.
Bandwidth Utilization Button
Displayed the per-port traffic utilization. It will set the TX, RX and Diagnostic Counter to utilization
mode.
About Polling
You can start counter by click the Start button, and click the Stop Button to stop.
Clear Counter button is use to clear all MIB counters, it will reset the counters to 0.
Polling interval button is used to set the time interval for the frequency of queried.
Port Status Submenu
You can view the port status of the switch that you select. The list box will show the status of port1,
port2…,and port26. The port status includes port type, enabled status, link status, speed duplex,
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0