Elation Professional 250 Scanner User Manual


 
Focus Spot 250™
©Elation Professional® - Focus Spot 250™
automatically ignite the lamp when unit is turned on. Use this function to turn this feature
on and off.
1. Access the main menu.
2. Tap the UP button until SPEC is displayed, press MODE/ENTER.
3. Tap the UP button until LAAU is displayed, press MODE/ENTER.
4. The display will show ON/OFF .
5. Press the UP button to display ON to activate this function, or OFF to
deactivate this function.
6. Press MODE/ENTER to confirm.
7. Press EXIT to return to the main menu.
DLOF – This feature allow you to control the lamp via DMX.
1. Access the main menu.
2. Tap the UP button until SPEC is displayed, press MODE/ENTER.
3. Tap the UP button until DLOF is displayed, press MODE/ENTER.
4. The display will show ON/OFF .
5. Press the UP button to display ON to activate this function, or OFF to
deactivate this function.
6. Press MODE/ENTER to confirm.
7. Press EXIT to return to the main menu.
DLAY – This function allow the user to set a lamp “strike” delay time.
1. Access the main menu.
2. Tap the UP button until SPEC is displayed, press MODE/ENTER.
3. Tap the UP button until DLAY is displayed, press MODE/ENTER.
4. The display will show D-XX .
5. Press the UP and DOWN buttons to adjust the delay time.
6. When completed press MODE/ENTER to confirm.
7. Press EXIT to return to the main menu.