Filter
Top Products
Focus Spot 250™
©Elation Professional® - – Focus Spot 250™
Never look directly into the light source,
as sensitive persons may suffer an epileptic shock.
Never touch the device during operation!
The housing may heat up
Please be aware that damages caused by manual modifications to the device are not
subject to warranty.
Keep away from children and non-professionals.
GENERAL GUIDELINES
This device is a lighting effect for professional use on stages, in discotheques, theatres, etc.
This fixture is only allowed to be operated with the max alternating current which is stated in
the technical specifications in the last page of this manual. This device was designed for
indoor use only.
Consistent operation breaks may ensure that the device will serve you for a long time
without defects.
Do not shake the device. Avoid brute force when installing or operating the device.
While choosing the installation-spot, please make sure that the device is not exposed to
extreme heat, moisture or dust. The minimum distance between light-output from the
projector and the illuminated surface must be more than 0,5 meter.
Always fix the fixture with an appropriate safety cable if you use the clamp to hang up the
fixture. When fixing the device on a raised-from-the- ground support, be sure to use no less
than screws and nuts of M10 x 25 mm and insert them in the pre-arranged screw holes in
the base of the fixture.
If you use the quick lock cam in hanging up the fixture, please make sure the 4 quick lock
fasteners turned in the quick lock holes correctly.
Operate the device only after having familiarized with its functions. Do not permit operation