Filter
Top Products
Compu Live V General settings
4.2. Using the IP interfaces
To use the IP interface you must first make sure that your IP interface is connected and configured
correctly, and recognized by the network and the computer which will control your lights. Refer to the
Appendix "IP/Ethernet configuration" for detailed instructions on how to do this. Then, in Compu Live,
under the "controller" tab, open the "Starting parameters"; then under "hardware" select "output." Here
you can select each DMX universe and assign it to a particular interface output. For the IP interface,
you must select your universe, then click next to "PC-Ethernet" and a drop-down menu will appear.
Scroll to IP_DMX(***.***.*.**) to select this particular IP interface. [Note-Each IP interface will have a
unique IP addres that will apear in the parentheses). Click OK, now your universe is assigned to the IP
interface
Page 97