Troubleshooting
Should an error occur, rst check the following points:
Having this problem? Check the following points:
Driver Installation not possible
Ø Check if the RX Computer USB transceiver correctly ts into
the USB port.
Ø Check the Installation help les at www.elinchrom.com /
Support.
Ø Use the correct Driver le for your operating system.
RX-Unit is not found in the
EL-Skyport software
Ø Check if Transceiver RX on the RX unit and the EL-Skyport.
software is congured with the same Frequency channel!
Ø Switch on only one RX unit for testing.
Distance range is too small
Ø Reposition the unit.
Ø Increase the distance to walls and ceilings.
Ø Position the antenna of Transmitter and Transceiver RX .
Ø Use an RX extension cable to reduce the distance between
the USB RX SPEED and the Transceiver RX modules.
CE Statement
This device has been tested and found to comply with the requirements set
up in the council directive on the approximation of the law of member states
relating to EMC Directive 2004/108/EG and 2006/95/EG. Low Voltage Direc-
tive R&TTE 99/5/EG.
7