Filter
Top Products
Product Data Document
420DS-2b
July 16, 2007 - Page 1
Bristol
®
ControlWave
®
Remote Ethernet I/O
Website: www.EmersonProcess.com/Remote
Remote Automation Solutions
With the ever-increasing demand for distributed
I/O architectures Bristol® ControlWave® Remote
I/O modules, from Emerson Process Management,
are the ideal solution to minimize installation cost.
The compact DIN-rail mount modules provide an
open connectivity through 10 Mbps Ethernet and
38.4 KB serial RS 485. The wide range of module
I/O congurations brings exceptional exibility to
network diversity. Each module is designed and
rated for harsh industrial environments, a perfect
compliment to the ControlWave Process Automation
Management Solution as well as our Network 3000
measurement and control system.
Features
Open Modbus (Modbus TCP) Ethernet
connectivity
RS 485 Modbus RTU or Modbus ASCII
Easy-to-use CongTools software conguration
Internal 24 V dc loop power minimizes wiring
cost
‘Hot Swap’ I/O module replacement
10 – 30 V dc power input
-30 to +70°C operating temperature range
CSA, UL Class I, Div. 2 Groups A-D, and CE
approved
Specications
All I/O
Compact 4 ¾” W x 3 ¼” H x 4 1/8” D
10 – 30 V dc power input
1.2 Watt typical per module (48 mA @ 24 Vdc)
– varies by module and load
Temperature: -30 to +70°C operating
temperature range
•
•
•
•
•
•
•
•
•
•
•
•
Humidity: 5 – 95% non-condensing
RS 485 port Master or Slave up to 38400 baud
– up to 32 nodes per line
Up to 16,000 nodes per network
10Base T at 10 Mbps Ethernet port
1200 V RMS 1 minute isolation on Ethernet
port
ESD (Electro Static Discharge) withstand: 8KV
Vibration meets IEC 68-2-6
1g for 10 Hz to 150 Hz
.5g for 150 Hz to 2000 Hz
The ControlWave Remote Ethernet I/O series con-
sists of seven modules
ControlWave Discrete Input Module
Number of inputs: 16
Input source or sink: Congurable
Input voltage: 12/24 V AC/DC
Input resistance: 3.6 KΩ
One High Speed Counter channel up to 2 KHz
Scan rate: 2 mS
Power: .75 watt
•
•
•
•
•
•
•
•
•
•
•
•
•
•