Filter
Top Products
Chemical System: Silver Oxide (Zn/Ag
2
O)
Nominal Voltage: 1.55 Volts
Typical Capacity: 9.5 mAh* (to 1.3 volts)
Capacity Test: 100K ohm continuous drain at 21°C
Typical Weight: 0.24 grams (0.008 oz.)
Typical Volume: 0.06 cubic centimeters (0.003 cubic inch)
Impedance (40 Hz): 30 to 40 ohms
Load
Cutoff
1.3V
(ohm) (hours)
100K 594
Typical Performance at Low Discharge Rates
Temperature Characteristics
SILVER OXIDE
Specifications
Cross Section
* Varies according to the applied load, temperature, and cutoff voltage.
Industry Standard Dimensions
ENERGIZER 346
©Energizer Holdings, Inc. - Contents herein do not constitute a warranty.
Im
p
ortant Notic
e
This datasheet contains typical information specific to products manufactured at the time of its publication.
Continuous 0.016
at 1.55V
(milliamperes)
Schedule
Typical Drains
Typical Performance at 21°C (70°F)
mm (inches)
Typical Discharge Characteristics
PRODUCT DATASHEET
1-800-383-7323 / USA
1-800-383-7323 / CANADA
1-800-383-7323 USA/CAN
www.energizer.com
Schedule: Continuous
Typical Drain @1.55V:
0.016 milliamperes
Load: 100K ohm
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
0 125 250 375 500 625
Service, Hours
Voltage, CCV
DESIGNED FOR USE ON CONTINUOUS LOW DRAIN
Service Effects
0
25
50
75
100
125
-20 0 20 40
Temperature (C)
Service (%)
Storage Effects
60
70
80
90
100
024681012
Storage Time (yrs)
Service (%)
40°C
20°C
0°C
Anode Cap
Gel Anode
Gasket
Can
Separator
Cathode
7.90 (0.311)
7.62 (0.300)
R0.40 (0.016) Ref.
Typical
0.01 (0.0004) Minimum Ref.
(applies to top edge of gasket or
edge of crimp, whichever is higher)
5.30 (0.209) Ref.
Typical
1.14 (0.045)
1.30 (0.051)
1.25 (0.049) Ref.
1.05 (0.041) Ref.
0.15 (0.006) Maximum Ref.
Permissible deflection from a flat
Form No. EBC - 4317D Page 1 of 1