Filter
Top Products
Control Codes
100-88002 Rev B Page 137
UPC A
UPC A is a fixed-length, numeric, continuous code that employs four element widths.
The printer supports Universal Product Code Version A, E, EAN-8, and EAN-13.
Version A encodes 11 digits. Typically, the UPC A format starts with a number system
digit, five-digit manufacturer’s code, five-digit product code, and a check digit. The
printer makes no assumptions about any of the codes except the check digit. The
printer prints an UPC bar code with the 11 digits sent to it and generates the check
digit. If fewer than 11 digits are sent, the remaining digits will be zeros. The printer
prints an UPC that is about 130% the size of the UPC nominal standard, which
provides optimal readability.
UPC E
UPC E is a zero suppression version of UPC. The printer requires that the first digit is
zero for number system zero. If it is not zero, the bar code is not printed. The printer
does the compression based on the compression rules for UPC E, prints an UPC bar
code based on the 11 digits sent to it, and generates the check digit. If fewer than 11
digits are sent, the remaining digits will be zeros. The printer prints an UPC that is
about 130% the size of the UPC nominal standard, which provides optimal readability.
EAN-13
EAN-13 is a fixed-length, numeric, continuous code that employs four element widths.
The printer supports EAN-13, which is a superset of UPC that encodes 12 digits.
Typically, the format starts with a number set digit, which defines how the next six
digits are encoded. The next five digits have fixed encoding. The last is a check digit.
The printer prints an EAN-13 bar code with the 12 digits sent to it and generates the
check digit. If fewer than 12 digits are sent, the remaining digits will be zeros. The
printer prints an EAN-13 bar code that is about 130% the size of the nominal
standard, which provides optimal readability.
EAN-8
EAN-8 is a fixed-length, numeric, continuous code that employs four element widths.
The printer supports EAN-8, which is a superset of UPC that encodes seven digits.
The printer prints an EAN-8 bar code with the seven digits sent to it and generates the
check digit. If fewer than seven digits are sent, the remaining digits will be zeros. The
printer prints an EAN-8 bar code that is about 130% the size of the nominal standard,
which provides optimal readability.
EAN-14
EAN-14 It is a high-density, fixed-length, numeric, continuous code, which employs
multiple element widths. EAN-14, is a subset of Code 128 that encodes FNC1 and 14
digit pairs. If fewer than 14 digits are sent, leading zeros will be added to complete the
code.
Code 93
Code 93 is a variable-length, alphanumeric bar code. The complete data field is
printed by the printer. Due to space limitations, only 10 characters can be printed.
Codabar
Codabar is a variable-length format, primarily used for numeric symbols. It offers 16
data characters, including the numeric digits zero through nine, and -, $, :, /, ., and +.