Filter
Top Products
Printing
l The PAUSE light is flickering and printer does not print or
it stops printing abruptly.
The print head is overheated. Wait a few minutes; the
printer resumes printing automatically when the print head
cools.
The print is faint or uneven.
l Printed characters have parts missing at the bottom.
The ribbon cartridge may not be installed properly. See the
section on ribbon installation in Chapter 1.
l The printout is faint.
The ribbon may be worn out. Replace the ribbon cartridge.
Check that the paper-thickness lever is set correctly for the
paper you are using.
Dots are missing in the printed characters or graphics.
l A line of dots is missing in the printout.
The print head is damaged. Stop printing and have your
dealer or a qualified service person to replace the print head.
l Dots are missing in random positions.
There is either slack in the ribbon or the ribbon has come
loose. Reinstall the ribbon cartridge.
Printed characters are not what you expected.
l The typestyle or characters that are set by your software
cannot be printed.
Check that the software is correctly installed for your
printer.
Troubleshooting 6-5