Filter
Top Products
98 Troubleshooting
n Paper Out
n Pause
••• No paper is loaded in the selected paper
source.
Load paper in the printer. Then press the
Pause button to turn off the Pause light, if
necessary.
••• The paper is not loaded correctly.
Remove your paper and reload it. See
“Printing on Continuous Paper” on page
17 for instructions on loading paper. Then
press the Pause button to turn off the
Pause light, if necessary.
••• Paper is jammed in the printer.
Turn off the printer, open the printer cover,
tear off the paper supply and turn the
paper feed knob to eject the remaining
paper.
f Paper Out
n Pause
••• Continuous paper is not fed back to the
standby position.
Tear off the printed document at the
perforation; then press the Load/Eject
button. The printer feeds the paper to the
standby position. Press the Pause button
to turn off the Pause light, if necessary.
••• A single sheet of paper is not fully ejected.
Press the Load/Eject button to eject the
sheet. Then press the Pause button to turn
off the Pause light, if necessary.
••• Paper is jammed in the printer.
Clear the paper jam as described in the
previous page.
f Pause – The print head is overheated.
Wait a few minutes; the printer resumes
printing automatically once the print
head has cooled.
Panel light
state
Beep
pattern
Problem
Solution