Filter
Top Products
4115559 Rev.0
1-F C
4115559 Rev.0
1-F M
4115559 Rev.0
1-F Y
4115559 Rev.0
1-F K
2 Pull out the extensions on the output tray and flip up the paper stop.
3 Squeeze the edge guide and slide it left.
4 Load paper against the right edge, with the printable side face up. Then
slide the edge guide over.
Note: Don’t load the paper sideways; always load it short edge first.
Note: Don’t load paper before installing the ink cartridges.
1 Lift up the printer cover and open the output tray.
2 Open the cartridge cover.
3 Shake the ink cartridges gently 4 or 5 times, then unpack them.
4 Remove only the yellow tape from each cartridge.
Caution: Don’t remove any other seals from the cartridges.
5 Insert the cartridges in the holder for each color.
Load paper
4
Caution: Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
If anything is missing, contact Epson as described on the back of this sheet.
Unpack
1
Start Here
Please read these instructions before using the printer.
6 Press the cartridges down until they click.
7 Close the ink cartridge cover and press it down until it clicks.
8 Close the printer cover.
9 Press the ink button to charge ink. Charging takes about 2.5 minutes.
Note: Your printer ships with full cartridges and part of the ink from the first
cartridges is used for priming the printer.
Caution: Don’t turn off the printer while the power light is flashing or you’ll
waste ink.
1 Connect the power cable.
Caution: Do not connect to your computer yet.
2 Press the power button.
Turn on the printer
2
1 Open the paper support and pull out the extensions.
Install ink cartridges
3
8½ x 11
4 x 6
Ethernet cable