Epson 705HD Projector User Manual


 
Quick Setup
Before using the projector, make sure you read the safety instructions in the
User’s Guide on your projector CD.
Connect the projector
Choose from the following connections:
Video Player
Connect up to 4 video devices and use the remote control to switch between
them.
RCA video cable
(composite video)
(optional)
S-Video
cable
(optional)
Component
video cable
(optional)
Audio cable
(optional)
HDMI video
cable
(optional)
Component-
to-VGA
adapter
Camera or USB Device
Connect a digital camera or other USB device to the projector’s Type A
(flat) USB port.
Digital camera
Thumb drive
You can use the projector’s Slideshow feature to project JPEG images. See the
User’s Guide on your projector CD.
Turn on your equipment
1
Turn on your video source.
2
Plug in the projector.
3
Open the A/V Mute slide all the way.
4
Press the power button on the projector or remote control.
Power light
Power button
The power light flashes green, then stays on.
NOTE: To shut down the projector, press the power button twice, then
unplug it. You don’t have to wait for the projector to cool down.
Adjust the image
1
If you don’t see an image, press the Source Search button on the
projector or the remote control to select the image source.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
Turn the focus ring to sharpen the image.
To reduce or enlarge the image, turn the zoom ring.
4
If your image looks like or , you’ve placed the projector off to
one side of the screen at an angle. Place it directly in front of the center
of the screen, facing the screen squarely.
5
If your image looks like or , press the or buttons on the
projector to correct it.
Using the remote control
Make sure the batteries are installed as shown (two included AA batteries).
Adjust aspect ratio
Navigate
projector
menus
Choose which
source to display
Control projector volume
Turn projector
on and off
Turn off projector
display and sound
Adjust color mode
Access
projector
menus
Get solutions to
common problems
Troubleshooting
If you see a blank screen
If you see a blank screen or the No signal message after turning on your
computer, check the following:
Make sure the power light on the projector is green and not flashing, and
the A/V Mute slide is open.
Make sure the cables are connected correctly. (See the User’s Guide for
more information.)
If you’ve connected more than one video source, you may need to press
the Source Search button on the projector or the remote control to
select the one you want to watch. (Allow a few seconds for the projector
to sync up after pressing it.)
If the picture is taller on one side
The projector is set at an angle to the screen. Face it squarely toward the
screen.
Where to get help
Manual
For more information about using the projector, install the User’s Guide from
your projector CD.
Telephone Support Services
To use the Epson PrivateLine
®
Support service, call (800) 637-7661 and enter
the PIN on the Epson PrivateLine Support card included with your projector.
This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday,
for the duration of your warranty period. You may also speak with a projector
support specialist by dialing one of these numbers:
U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time,
Monday through Friday
Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time,
Monday through Friday
Days and hours of support are subject to change without notice. Toll or long
distance charges may apply.
Internet Support
Visit Epson’s support website at epson.com/support and select your
product for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson with
your questions.
Registration
Register today to get product updates, special promotions, and customer-only
offers. You can use the CD included with your projector or register online at
www.epson.com/webreg.
PowerLite
®
Home Cinema 705HD
*411761300*
*411761300*
Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson
Corporation. PowerLite and PrivateLine are a registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of
their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2009 Epson America, Inc. 7/09
Printed in XXXXXX CPD-27616