Filter
Top Products
15
Using Advanced Settings
For maximum control over your
project, you can customize your print
settings—such as Print Quality and
Gamma—and use special effects.
To access these settings in your
printer software, click Custom and
then click the Advanced button.
You see the Advanced dialog box.
For details on all the settings, click
Help on screen or see your electronic
Reference Guide (as described on
page 2).
After you customize your print
settings on the Advanced dialog box, you can save them as a group so you can reuse
them whenever you print a similar project. See your electronic Reference Guide for
details.
The default Gamma setting of 1.8 provides the optimum contrast quality
for your photos. However, you can change it to either 1.5 (for decreased
contrast) or 2.2 (for increased contrast; recommended for matching
colors with sRGB devices).
Printing on Envelopes
You can load up to 10 envelopes at a time, flap edge
first and printable side up. Place them against the
right edge of the sheet feeder and slide the left edge
guide against them.
(For best results, press each envelope flat before
loading it, or load one envelope at a time.)
Select
Plain paper
as the Media Type setting and
choose the correct envelope size as the Paper Size
setting.
If your printout has smears or banding (light lines), try turning off High Speed in the
Advanced dialog box. (See the instructions above to access the dialog box.)
load with the
printable side
up