Filter
Top Products
214
214 | Using the Optional Auto Take-Up Reel
Loading Roll Paper Onto the Take-Up Reel
Before you load roll paper onto the take-up reel core, check the following:
• Turn off the Auto Take-Up Reel to avoid injury.
• Make sure that the leading edge of the roll paper is straight.
1. Plug in the power cord.
2. Make sure the printer is on and the Auto Take-up Reel icon appears
on the LCD panel.
3. Make sure that the roll paper is loaded in the printer properly. For
instructions, see page 59.
4. Press the l button to select (Auto Cut Off).
5. Press the d button to feed the roll paper out of the printer.
Continue with the steps in the next section if you want to wind your prints
forward, or page 216 if you want to wind your prints backward.
WARNING: Make sure
the Auto Take-Up Reel is
installed properly and is
turned off before loading
paper. If it is installed
incorrectly or operates
unexpectedly, bodily
injury may occur.