Filter
Top Products
17
Connect the Printer to Your Network
Connect your printer to an Ethernet twisted-pair (10BaseT or 100BaseTX) network
connection.
1. Attach the network cable to the connector on the card.
2. To initialize the card, turn on the printer while pressing down the status sheet
button. Continue pressing the status sheet button for five seconds.
Printing a Status Sheet
To print a status sheet, press the status sheet button and hold it for about three
seconds. This sheet gives you important information, including the serial number and
MAC address (hardware address) of the card. Keep the status sheet so you can use it
when you configure the Ethernet card.
status sheet button
twisted-pair connector
(10BaseT or 100BaseTX)
setup.fm Page 17 Friday, February 19, 1999 4:00 PM