Filter
Top Products
24
Follow these steps to install Status Monitor 2:
1. Insert the printer software CD-ROM. You see the following screen:
If the screen does not appear, type
D
:\EPSETUP (where
D
: is the drive letter of
your CD-ROM) and click
OK to start the EPSON Installation program.
2. Highlight
Install Status Monitor 2 for Network and click the right arrow
button .
3. Close any open programs and click
Next. A screen appears asking where you want
to install Status Monitor 2.
4. Click
Next to accept the default directory or choose a different directory and click
Next.
5. If you are using Windows 98 or Windows 95 and you have TCP/IP installed, you
see a screen asking you if you want to enable EPSON TCP/IP printing. Select
Yes if you want to print with TCP/IP, and then click Next.
TCP/IP Printing: Yes_______ No_______
6. Select the type of printer(s) you want to monitor and click Next.
Monitor: EPSON TCP/IP printers______ Windows shared printers _____
NetWare printers______ local printers_______
instconf.fm Page 24 Friday, February 19, 1999 4:00 PM