Filter
Top Products
33
Using EPSON Net!2 to Configure the Card in Print
Server Mode
Once you have set up the printer in NwAdmin or PCONSOLE, you can configure
the printer with EPSON Net!2, as described below.
If the Status Monitor 2 utility is running, or if background
monitoring is turned on, it may interfere with EPSON Net!2.
Close Status Monitor 2 if it is running and turn off background
monitoring, following step 14 on page 25.
If you have connected more than one printer with the same
type of Ethernet card to the network, you can distinguish the
cards by their MAC addresses. Press and hold the card’s
status sheet button for three seconds to print a status sheet
with the MAC address of the card.
If the IP address is set to the default IP address, the printer
model might not appear.
Follow these steps:
1. Start EPSON Net!2. The following screen appears:
2. Highlight your
EPSON Stylus COLOR 900N printer and click Configuration.
instconf.fm Page 33 Friday, February 19, 1999 4:00 PM