Filter
Top Products
51
Changing Your Port Setting
Follow the steps below to change the port setting. In Windows NT 4.0, make sure the
TCP/IP Print Server service is running before you start.
1. Click
Start, point to Settings, and click Printers.
2. Right-click the
EPSON Stylus COLOR 900N printer icon.
3. Select
Properties.
4. In Windows 98 or Windows 95, click the
Details tab.
In Windows NT 4.0, click the
Ports tab.
5. Click
Add Port.
6. In Windows 98 or Windows 95, click
Browse and choose the server or
EPSON_TCPIP_Printer that your printer is set up on. Then click
OK.
In Windows NT 4.0, click
LPR Port, then type the printer’s IP address and the
name you want to assign. Click
OK, Close, and OK again.
Installing in Windows 3.1x
1. Make sure Windows Program Manager is running and exit any open application
programs.
2. Insert the printer software CD-ROM.
3. Open the File menu and select
Run.
4. Type
D
:\EPSETUP (where
D
: is the drive letter of your CD-ROM) and click OK.
You see the Software Installation screen (shown on page 50).
5. Highlight
Install Printer Driver and click the right arrow button .
6. Click
OK to install the software.
Your printer is automatically set to your local port, LPT1. You need to change it to
follow the network path to your printer. See the section below.
clients.fm Page 51 Friday, February 19, 1999 4:01 PM