Filter
Top Products
84
6. Pull up the ink cartridge clamp. The cartridge
rises up from its holder.
7. Lift the cartridge out of the printer and dispose
of it carefully.
If ink gets on your hands, wash them thoroughly with soap
and water. If ink gets into your eyes, flush them immediately
with water.
8. Lower the new ink cartridge into its holder
with the label facing up and toward the back of
the printer.
9. Press down the ink cartridge clamp until it
locks in place.
10. Press the
E load/eject button. The print head
moves to the color ink cartridge replacement
position. If you need to replace the color ink
cartridge, repeat steps 6 through 9. Then
continue with step 11.
11. Press the
E load/eject button again and close the printer cover.
The printer moves the print head and begins charging the ink delivery system.
The
P power light flashes and the printer makes various sounds.
Charging takes about one minute. When it’s finished, the
P power light stops
flashing and stays on.
Never turn off the printer while the
P power light is flashing,
unless the printer hasn’t moved or made noise for more than
5 minutes.
maint.fm Page 84 Friday, February 19, 1999 4:02 PM