Filter
Top Products
The time and date are set automatically as soon as you press
Enter after typing the time and date; you do not need to save
these settings. Therefore, if you change either setting in the
Setup program and then exit the program without saving your
changes, the new time or date still takes effect.
Leaving the Setup Program
When you finish setting the options in the Setup menu,
highlight the
Exit
option and press
Enter. You
see a
summary such as this:
Memory size
Display type
Coprocessor
Mass storage
Real-time clock
Main
640KB
Expansion
0 KB
Color/graph. 80 col
80287 not installed
Drive A:
Drive B:
Drive C:
Drive D:
Time 13:30:00
Date
08-30-1989
1.2 MB
None
Type 11
None
C h a n g e S e t t i n g s
E x i t w i t h o u t s a v i n g
** EXIT AND SAVE **
Check the list to see if all the information is correct. If any
setting is incorrect, highlight Change settings and
press Enter. The main Setup menu appears and you can change
the setting, as necessary.