Filter
Top Products
Note
Sometimes, after a hard disk has been used for a long time,
its data becomes fragmented, causing the disk to perform
less efficiently or produce errors. If this happens, check your
operating system manual for procedures you can perform to
reorganize your data on the hard disk. If those procedures
(or a commercial defragmenting utility) do not solve the
problem, you may want to reformat the disk by following
the instructions in this chapter.
Follow these steps to start the hard disk formatting program:
Insert the Reference 1 diskette in drive A.
1.
2.
3.
4.
5.
6.
7.
Turn on or reset the computer. After a moment you see the
title screen for the System Configuration program.
Press any key to continue. You see the Welcome screen.
Press IEnter You see the Main Menu.
Press
m
to highlight Access to other utilities
and press
[.
At the next menu, highlight LOW- level format hard
disk and press IEnter
You see a prompt to insert the Reference 2 diskette. Remove
the Reference 1 diskette, insert the Reference 2 diskette, and
press [Enter.
Starting the Program
B-2
Formatting a Hard Disk