Filter
Top Products
148
List of ESC/VP21 CommandsList of ESC/VP21 Commands
USB Connection Setup
In order to control the projector using ESC/VP21 commands via a USB
connection, the following preparations must be carried out.
PROCEDURE
Download the EMP Link21L utility software from the
EPSON website to the computer being used.
For details on acquiring the software, please visit the Web site
http://www.epson.co.uk/support/download/projector.htm
.
The USB driver (USB-COM Driver) will be downloaded
together with the utility software, so install this USB
driver on the computer that is to be used.
Refer to the EMP Link21L User's Guide that is downloaded
together with the utility software for instructions on installing
the USB driver.
Change the "COM Port" setting in the "Advanced2"
menu to "USB".
Turn the projector off.
After the cool-down period has finished, turn the
projector's power back on.
Once the projector's power has turned back on, communication
via a USB connection will then be possible.
1
2
3
4
5
CAUTION
If the power cable is disconnected before cool-down has finished, the
communication port will not be changed.