Filter
Top Products
28
Connecting to a Video Source
Projecting RGB Video Images
RGB video is used when projecting RGB signals from a video source other
than a computer that is connected to the projector. Either of the following
two connection methods can be used. Use whichever method is suitable for
the video equipment's port.
Use the accessory computer cable to make the connections.
TIP
• After projection starts, change the "BNC Input" setting in the
"Setting" menu to either "YCbCr " or "YPbPr " to match the
signals from the video equipment. p.86
• If more than one external component is connected to the projector,
press the [BNC] button on the remote control after projection starts,
or repeatedly press the [Video/BNC] button on the projector's control
panel until "BNC (YCbCr)" or "BNC (YPbPr)" is displayed on the
projected image to select the signal to be projected. p.43
If the RGB Output Port is a Mini D-Sub 15-pin Port
To RGB output port
Computer cable
(accessory)
To [Computer 1] or
[Computer 2] port (blue)
TIP
• After projection starts, change the "Computer1 Input" or
"Computer2 Input" setting in the "Setting" menu to "RGB-Video".
p.86
• If more than one external component is connected to the projector,
press the [Comp1] or [Comp2] button on the remote control after
projection starts, or repeatedly press the [Computer/DVI] button on
the projector's control panel to select the signal to be projected.
p.43