Filter
Top Products
55
Adjusting the Screen Image
When vertical keystone correction is carried out, the height of the
projected images will become shorter. Use the height correction function to
adjust the height of the projection area.
Adjustments using the height correction function are carried out using the
configuration menus.
PROCEDURE
Press the [Menu] button on either the remote control
or the projector's control panel. Then select "Height"
from the "Keystone" sub-menu of the "Setting" menu.
The height correction screen will be displayed. See "Using the
Configuration Menus" for details on this operation. p.96
TIP
• When vertical keystone correction is carried out, the projected
images will become smaller. Use the [Zoom] button to adjust the size
of the images. p.48
• If the images become uneven in appearance after vertical keystone
correction is carried out, decrease the sharpness setting.
p.78, p.81
• If the value displayed in the gauge on the screen stops changing
when vertical keystone correction is being carried out, it indicates
that the limit for vertical keystone correction has been exceeded.
Check that the projector has not been set up at an angle which
exceeds the proper limit.
• If the V-Keystone function is used while any of the following
functions are in use, the function in use will be cancelled.
· E-Zoom · Real display · Freeze · A/V Mute
Correcting the Height of the Projection Area After
Vertical Keystone Correction (Height Correction)
1
[ ]: Select[ ESC ]: Return
[Menu]: Exit
[ ]: Adjust
Video
Audio
Setting
User's Logo
Advanced1
Reset All
About
Advanced2
Effect
V-Keystone
:
32
+
-
Height
:
0
+
-
Keystone