Epson 300 Printer User Manual


 
8. See the appropriate table in your printed instructions. Press
the FONT button to move through the settings in the table. The
printer beeps twice each time you press the FONT button
while in a submenu table.
9. When the control panel lights match your desired setting,
press the PAUSE button to make your selection. The printer
saves the new setting and returns to Table B.
10. Repeat steps 6 through 9 for each additional setting you want
to change, or skip to step 11 to exit the Printer Setting mode.
11. When you are finished, turn the printer off. Any settings you
have made remain in effect until you change them again.
Printer setting descriptions
This section describes all the settings available in the Printer
Setting mode.
Character spacing
When you select 10 cpi, the printer prints 10 characters per inch
(cpi). When you select 12 cpi, it prints 12 characters per inch.
Shape of zero
The printer prints the zero character with a slash (0) when the
setting is on, or no slash (0) when the setting is off. The slashed
zero allows you to easily distinguish between an uppercase “O”
and a zero when printing such items as program lists.
L
Blueberry REV.D
A5 size Chapter 2
95/01/20
2-22 Using the Printer