Epson 5550C Projector User Manual


 
1 • Setting Up the Projector
16
Attaching the Hand Strap
Follow the steps below to attach the hand strap to the projector with
the two screws included with the strap.
1. Gently place the projector on its side, so you are looking at the
bottom and the back of the projector is facing left.
Caution:
Do not lift or hold the projector by its lens; this can
damage the lens.
2. Locate the blue slider button on the bottom front of the projector
and slide the button up until the front strap connector is fully
extended
.
front strap connector
slider button