Filter
Top Products
Using the Projector
25
If the image still isn’t large enough, you may need to move the
projector farther away from the screen. You can also use the
E-Zoom
button on the remote control to zoom in on a portion of the image.
See page 35 for instructions.
Adjusting the Height of Your Image
If the image is too low, you can raise it by extending the projector’s
foot.
1. Stand behind the projector. Press the foot release button and lift
the front of the projector. This unlocks the foot.
2. Once the image is positioned where you want it, release the
button to lock the foot in position.
3. If you need to straighten the image, rotate the round adjustable
foot at the back of the projector.
If the image is no longer square after raising it, see the next section.
foot release
button
back
adjustable
foot