Epson 800P Projector User Manual


 
86
Appendix A: Connecting to Additional Equipment
Connecting the Mouse Cable
To use the remote control as a mouse, follow the steps below. Youll
use a different mouse cable, depending on whether your computer has
a round PS/2 mouse port or a flat USB port.
The USB cable also provides audio support. If your computer
supports USB and your presentation includes sound, you can play it
through the projectors speakers by connecting the USB cable.
1. Connect the square end of the USB cable to the projectors USB
port as shown.
2. Disconnect your mouse from the port on the back of your
computer and replace it with the other end of the cable. (Your
computers mouse will be disabled while you are using the remote
control as a mouse.)
note
If you have a PC with a
serial mouse port, youll need
a serial mouse cable. See your
projector dealer to obtain the
correct cable.
USB cable
USB port