Filter
Top Products
28
Maintaining Your Printer
Running the Head Cleaning Utility
1. Make sure the printer is turned on but not printing, and the red
b
error light is
off. (If the red light is flashing or on, you may need to replace the ink cartridge;
see page 29 for details.)
2. Do one of the following:
■
Windows: Right-click the printer icon on your taskbar (in the lower right
corner of your screen). Select
Head Cleaning
.
■
Macintosh:
OS 8.5.1 to 9.x: Open the File menu and choose
Page Setup
or
Print
. Click
the
Utility
button, then click the
Head Cleaning
button.
OS X: Open the
Applications
folder and select
EPSON Printer Utility
.
Select
C62 Series
in the printer list, click
OK
, and select
Head Cleaning
.
3. Follow the instructions on the screen to clean the print head. Cleaning takes
about 30 seconds, during which the printer makes some noise and the green
P power light flashes.
Caution: Never turn off the printer while the
P
power light is flashing, unless the
printer hasn’t moved or made noise for more than 5 minutes.
4. When the green
P power light stops flashing, make sure paper is loaded in the
printer and click
Print Nozzle Check Pattern
. Then click
Print
. The nozzle
check pattern prints (see the next section for details).
5. If the nozzle check pattern has no gaps or lines, click
Finish
.
If the pattern has white lines, click
Clean
to clean the print head again.
If you don’t see any improvement after cleaning three or four times, check the
solutions beginning on page 43. You can also turn the printer off and wait
overnight—this allows any dried ink to soften—and then try cleaning the print
head again.