Filter
Top Products
Follow these steps to load a single sheet in the manual feed slot:
1. Turn on the printer. Make sure that the paper-release lever is
set to the single sheet position.
c
Caution:
Do not insert a sheet of paper before you turn on the
printer.
2. Position the right edge guide even with the arrow mark on
top of the manual feed guide, and then slide the left edge
guide to match the paper’s width.
Note:
Before loading paper more than 364 mm wide, such as A2 or
US C, move the right edge guide to the right as far as it will go.
2-4
J103
L
Loire2 Ref. Guide
Rev.c
A5 size Chapter 7
11-11-96 DR, pass 0
7-6
Paper Handling