Filter
Top Products
For single-sheet labels:
❑
Load sheets of labels into the manual feed slot one sheet at
a time. Otherwise, they may not feed properly. See
“Loading paper manually” on page 7-5. Also, see Appendix
C for specifications.
❑
Only use labels that completely cover the backing sheet;
otherwise, they may peel off and jam the printer.
❑
Make sure that the printable surface of the labels is face up.
For continuous labels:
❑
Choose labels mounted on a continuous backing sheet with
sprocket holes for use with the tractor feeder.
❑
Make sure the printing stays entirely within the printable
area. See Appendix C for specifications.
❑
Make sure you load labels with the printable surface face up.
❑
Make sure the auto tear-off feature is set to off in the
default-setting mode when using continuous labels.
❑
Do not leave labels loaded in the printer between jobs; they
may curl around the platen and jam when you resume
printing.
L
Loire2 Ref. Guide
Rev.c
A5 size Chapter 7
11-11-96 DR, pass 0
7-30
Paper Handling