Filter
Top Products
The printer does not work and the control panel lights are off.
Cause What to do
The power cord is not
properly plugged into the
electrical outlet.
Turn off the Operate button, make
sure the power cord is firmly plugged
into the electrical outlet, and turn on
the Operate button. If the control
panel lights still don’t come on, contact
your dealer.
The printer is turned off. Turn on the Operate button. The
Operate light will come on.
The electrical outlet is
controlled by an outside
switch or automatic timer.
Use a different outlet.
The outlet is out of order. Plug another electrical device into the
outlet to determine whether the outlet
is working. If it is not, use a different
outlet.
Operation
The Operate light is on but nothing prints.
Cause What to do
The interface cable is not
plugged in securely.
Confirm that both ends of the cable
between the printer and the computer
are fastened securely.
If the cable is connected correctly, run
a self test as described on page 10-4.
Your interface cable does not
meet both the printer and
computer specifications.
Use an interface cable that meets both
printer and computer specifications.
See Appendix C.
L
Loire2 Ref. Guide
Rev.c
A5 size Chapter 10
11-11-96 DR, pass 0
10-8
Troubleshooting