Filter
Top Products
Attaching the paper support and the output tray
You should install the paper support and the output tray
before you begin using the printer. To install these items,
follow the steps below.
1. Attach the paper support by placing the notch on the right
side of the support over the mounting post of the printer.
Then push the left side notch onto the left mounting post.
2. Attach the output tray by fitting the notches on the tray
over the mounting posts as shown below.
1
2
C101
!C102
2
R
Loire2 Ref. Guide
Rev.c
A5 size Chapter 2
11-11-96 DR, pass 0
Getting Started
2-5