Filter
Top Products
EPSON Namer
Assigns a unique name to the printer so that you can use it on
an AppleTalk network.
Assigning a name to the printer
Use the following procedure to assign a name:
1. Double-click the
EPSON Namer
icon.
The EPSON Namer utility will be located on your hard disk
drive if installed. If it has not been installed, insert the
printer software CD-ROM into your computer’s CD-ROM
drive and open the utility from there. (If you use the floppy
disk version, insert it in a disk drive and open the utility
from there.)
2. Click the
EPSON Stylus(AT)
icon in the Device Types window.
3. If there are multiple AppleTalk zones at your site, select the
zone in which the printer is located.
4. Under New Name, enter a name for your printer. You should
assign a name that clearly distinguishes your printer from
others on the network.
5. Click
Rename
and then click
Done
to quit EPSON Namer.
L
Loire2 Ref. Guide
Rev.c
A5 size Chapter 2
11-11-96 DR, pass 0
2-28
Getting Started